SANHE 3A RUBBER & PLASTIC CO., LTD.
SANHE 3A RUBBER & PLASTIC CO., LIMITED EXCELLENCE QUALITY SINCERE SERVICE
Add to Cart
| Item | ID(inner diameter) (mm) | Tolerance of ID (mm) | Wall thickness (mm) | Tolerance of wall thickness (mm) | Length (mm) |
| SFG-1 | 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 | ±0.05 | 0.2 | ±0.05 | ≥200 |
| 0.3 | |||||
| 1.2, 1.4, 1.5, 1.6, 1.8 | ±0.08 | 0.2 | ±0.05 | ||
| 0.3 | |||||
| 0.4 | ±0.08 | ||||
| 2, 2.2, 2.4, 2.5, 2.6, 2.8, 3.0, 3.2, 3.4, 3.5, 3.6, 3.8, 4.0 | ±0.10 | 0.2 | ±0.05 | ||
| 0.3 | |||||
| 0.4 | ±0.08 | ||||
| 0.5 | ±0.10 | ||||
| 1.0 | ±0.15 | ||||
| SFG-2 | 5, 6, 7, 8 | ±0.10 | 0.5 | ±0.08 | According to the customer's demand |
| 1.0 | ±0.10 | ||||
| 1.5 | |||||
| 2.0 | |||||
| 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 25 | ±0.10~±0.20 | 1.0 | ±0.10~±0.15 | ≥200 | |
| 1.5 | |||||
| 2.0 | |||||
| ≥25 | ±0.25 | 1.5~2.0 | ±0.20 |
Note: The information above is just for your reference. The final products depend on the customer's technical requirements.
